Is Schoellerwerk ISO 9001 certified?

Yes, along with IATF 16949, ISO 3834, ISO 14001, ISO 50001, the PED 2014/68/EU directive and EHEDG EL Class 1. We forward the certificates on simple request — see the Quality and certifications page.

Is Schoellerwerk the only partner mill to carry the "widest range" claim?

Yes: it is the only one of the four partner mills to cover titanium in addition to austenitic, ferritic, duplex and nickel alloy grades.

What is a redrawn tube?

A seamless tube that goes through one or more additional cold-drawing passes after extrusion, to tighten its dimensional tolerance and improve surface finish — useful in hydraulics, instrumentation and OEM applications where mechanical clearance must stay constant. Detail on the Precision redrawn tube product page.

Is Schoellerwerk EHEDG certified?

Yes, EHEDG EL Class 1 — relevant for food and pharmaceutical applications requiring a hygienic surface finish.

PARTNER MILL · GERMANY

Schoellerwerk — high-precision welded and redrawn tube, Germany

Schoellerwerk produces high-precision welded and redrawn tube in Germany, with the widest grade range of the four partner mills: austenitic, ferritic, duplex, nickel alloy and titanium. Over 800 employees, 75,000 m² of production floor. It's our only European partner mill, and the one for made-to-order work.

Request a quote

Specialty

High-precision welded tube

Grades

austenitic, ferritic, duplex, nickel alloys, titanium

Headcount

Over 800 employees, 75,000 m²

What does Schoellerwerk produce?

Standard as-welded calibrated tube, annealed and precision-redrawn tube, cut-to-length and defined end machining, polished tube and flush-weld tube — on the widest grade range of the four partner mills, the only one to cover titanium in addition to austenitic, ferritic, duplex and nickel alloy grades.

What dimensions and grades are available?

Dimensions by process at Schoellerwerk
Process	Dimensions
Longitudinally welded (TIG or laser)	Ø 3.00 to 127.00 mm, thickness 0.20 to 3.00 mm
Cold redrawn	Ø 0.50 to 48.30 mm, thickness 0.05 to 2.30 mm
Lengths	10 mm to 38,000 mm; coils up to Ø 25 mm

Grades: austenitic, ferritic, duplex, nickel alloys, titanium.

What certifications does it hold?

ISO 9001
IATF 16949
ISO 3834
ISO 14001
ISO 50001
PED 2014/68/UE
EHEDG EL Class 1

When should you go through this mill?

You go to the mill when volume and lead time allow it — on the order of a container, sometimes less, with a horizon of a few months, shipping included. We make that call: when buying at the source works out cheaper for you, we tell you.

Precision, redrawing, made-to-order work, and grades nobody else produces in small diameter — titanium, nickel alloys, duplex. It's also our only European partner mill.

Frequently asked questions

Is Schoellerwerk ISO 9001 certified?: Yes, along with IATF 16949, ISO 3834, ISO 14001, ISO 50001, the PED 2014/68/EU directive and EHEDG EL Class 1. We forward the certificates on simple request — see the Quality and certifications page.
Is Schoellerwerk the only partner mill to carry the "widest range" claim?: Yes: it is the only one of the four partner mills to cover titanium in addition to austenitic, ferritic, duplex and nickel alloy grades.
What is a redrawn tube?: A seamless tube that goes through one or more additional cold-drawing passes after extrusion, to tighten its dimensional tolerance and improve surface finish — useful in hydraulics, instrumentation and OEM applications where mechanical clearance must stay constant. Detail on the Precision redrawn tube product page.
Is Schoellerwerk EHEDG certified?: Yes, EHEDG EL Class 1 — relevant for food and pharmaceutical applications requiring a hygienic surface finish.